A sudden epidemic made the Spring Festival holiday extra long. Virus is a respiratory infectious disease. Close-up droplet transmission is the main route of transmission, so reducing travel and gathering is the most important blocking measure. Going out, not going to areas where the epidemic is endemic, not going to public places, and crowding places can reduce the risk of transmission. So being honest at home is the biggest contribution to the country.
At the same time, due to inconsistent control of epidemic situation in various places, many enterprises also actively responded to the government's call and delayed the return to work. In some areas, production has been stopped for a long time. It is recommended that the equipment be maintained for a long period of non-operation to reduce unnecessary losses and prepare for resumption. So how should the sublimation printer be maintained and what should be paid attention to when it is used?
Fedar sublimation printer maintenance during epidemic
1. The ambient temperature of the sublimation printer should not be lower than zero. Specially remind friends in the north to pay attention to the room temperature of the room where the sublimation printer is located. If it is too low, it will cause great damage to the sublimation printer. 15 ° C-30 ° C, humidity kept at 35% -65%.
2. If the nozzle of the sublimation printer is not used for a long time, it will cause the nozzle to be blocked. It is recommended to print the nozzle test strip every 3 days to check whether the nozzle is blocked. If it is blocked, perform the cleaning operation to ensure that the nozzle is in the best state.
Perform cleaning operation and check the state of the nozzle, please do not exceed 15 days, too long time may cause the nozzle to block the hole.
3. Cover the sublimation printer with a dust cover to prevent dust from contaminating the equipment, and place it in a safe place, and do a good job of fire prevention, waterproofing, anti-theft, rat-proof, insect-proof, etc. to avoid equipment damage due to abnormal reasons.
Preparations after the epidemic
Before the Fedar sublimation printer is turned on, first ensure that the equipment's working environment reaches the optimal temperature and humidity, the specific temperature is 15 ° C-30 ° C, and the humidity is 35% -65%. Please check the printing machine carefully to ensure that all parts are installed in place.
If the sublimation printer has not been used for a long time, it is recommended to empty the ink cartridge when it is used again to avoid unnecessary loss due to ink deterioration caused by nozzle blockage or unstable colors.
During the epidemic, Fedar Sublimation Printing Machine warmly reminded everyone to do a good job in daily epidemic prevention work, go out less, do not gather, wear face masks, wash hands frequently, and ventilate.