The Cold Wave is Coming, What Should I Do If th Eco Solvent Printer Flies and Breaks ?

The temperature continues to drop, and many photo machine users have reported that the Eco Solvent printer has the phenomenon of oblique spraying, flying ink, and false pictures when the Eco Solvent printer  is working. In fact, this is all caused by the "temperature".

  • Working temperature

The temperature of the working environment is very important for the Sky Color Eco Solvent printer . If the temperature is too low, the Eco Solvent printer  will have oblique spray, flying ink, and false printing. When the user finds that the image of the test strip is false, he can use an electric fan or a hair dryer to heat up the nozzle to avoid such problems when the photo machine is working. In addition, before using the photo machine, the user should turn on the air conditioner or electric heating fan in advance to warm up the working environment of the Eco Solvent printer . The temperature should preferably be kept at 15℃-30℃, so that the photo machine is in the best working condition, which not only improves the working efficiency. , And the printing effect is also excellent.

H1808 Eight Head Eco Solvent printer  


  • Prevent static electricity and dust

In addition, static electricity is easily generated in winter, especially in air-conditioned rooms, where the air is extremely dry, which is a hotbed for generating static electricity. Excessive static electricity will increase the working loss of the photo machine and affect the life of the print head. Therefore, when the user turns on the air conditioner, it is best to turn on the humidifier synchronously to increase the air humidity. The humidity is best maintained at 35%-65%. The humidifier should be connected to the photo machine board. Keep a distance to avoid condensation of water droplets, which may cause a short circuit on the board. In addition, the grounding wire is the best way to derive static electricity. It is to connect a ground wire to the printer and bury it in the ground with a depth of not less than 2 meters. You can also pour salt water in the buried place to enhance conductivity.

In the dry weather in winter, static electricity and dust can damage the nozzles. If the static electricity is too large, the nozzles or circuits are easily damaged. Dust can easily clog the nozzles and cause the printed image to break. So when you use the photo machine in winter, you should pay attention to controlling the printing speed to prevent excessive static electricity. Secondly, pay attention to cleaning the nozzle regularly to prevent dust from clogging the nozzle.


  • Choose good ink

Too low temperature will also change the viscosity of the ink, especially inferior ink. In winter, the viscosity of the ink will increase, clogging the nozzle and causing oblique spraying and ink breakage, which will affect the life of the nozzle. Therefore, users should choose inks with good weather resistance and good quality when purchasing inks. It is recommended that users choose Tiancai original inks, imported raw materials, smooth use, viscosity is not affected by temperature, and continuous output for a long time. In addition, pay attention to the storage of ink. The ink is prone to qualitative changes if it is kept in a sub-zero environment for a long time. It is best to store it in an environment of 15 ℃ -30 ℃.

The winter weather is special, and the impact on the Eco Solvent printer  is very obvious. We hope that users should pay special attention to the above points when using the Sky Color Eco Solvent printer . Only a good working environment can help the Sky Color Eco Solvent printer  give everyone the best experience.